natus Photic Stimulator, Руководство пользователя и обслуживания

Страница: 14 / 24

Natus Photic Stimulator User & Service Manual
12
Safety Standards
This component complies with the following electrical safety standards:
UL 60601-1
CAN/CSA C22.2 No. 601-1-M90
IEC 60601-1-2:2007 Electromagnetic Compatibility (EMC) Testing
Environmental Conditions

Select a room with properly grounded power sources.

Do not use or store your equipment in places where chemicals are stored or where there is a
potential for gas leakage.

Avoid moisture or contact with water, extreme atmospheric pressure, excessive humidity and
temperature, poorly ventilated areas and dusty, saline or sulfuric air.

Verify the selected site maintains a relative humidity between 30% and 75% (without
condensation).

Verify all conditions meet the requirements listed in the Environmental Specifications section
of this manual.
Room Topography

Place all equipment on an even, level surface. Avoid the potential for mechanical shock or
possible vibrations during setup system operation or when relocating the equipment.

Verify the power supply and all portable multiple socket-outlets are off the floor and in a
dry location.
Electrostatic Discharge (ESD) Handling Procedures
and Warnings
Before performing any setup or placement procedures, it is recommended that all clinical staff
read and/or are trained on the precautions outlined in this section.
WARNING: Be sure to take the appropriate Electrostatic
Discharge (ESD) precautions. Disconnect the cables before
moving, cabling, or performing any set up procedures.
Some semiconductor (solid state) devices can be easily damaged by static electricity. Such
components are commonly called Electrostatically Sensitive Devices (ESD). Do not touch the
accessible conductive parts or pins for the Connectors marked with the ESD symbol unless ESD
precautionary procedures are used.