6 MADSEN Zodiac test controls
29
MADSEN Zodiac
Sequence testing
Seq.
(automatic sequence
testing)
This function allows you to combine multiple measurements and run them
in an automated sequence.
Press this button to select automatic sequence testing. The buttons
corresponding to the tests and test functions included in the sequence light
up on the device, e.g., Tympan Ipsi and Contra Reflex Thresholds at
several frequencies.
When you press the
Start/Stop
button, all functions that have been
selected for the sequence are performed.
You can adjust any settings related to the tests included in the sequence.
Diagnostic sequence
Tympan Reflex Threshold (+ Reflex Decay, if selected from the
Set-
tings
menu).
Screening sequence
Tympan Reflex Screening.
Running tests
Start/Stop
This button is placed both on the device and on the diagnostic probe
shoulder strap.
This button is lit while a test is running.
•
Press this button to perform a tympanometric measurement, to start
reflex tests, and to present stimuli for manual reflex testing.
•
During a test, press this button to stop the test.
Auto-start
Press this button to activate
Auto start on seal
before you place the probe
in the patient's ear.
This button is disabled when you use the Quick Check probe, which always
uses
Auto start on seal
.
Dial
Turn the dial to adjust pump pressure and to control the stimulus level.
Ear
This button is located both on the device and on the probes.
Press this button to toggle the ear selection associated with the current
measurement. The button lights up in the color of the selected ear.
Delete
Press this button to delete the selected measurement curve.
