28
CC Stimulator Output (isolated)
CC stimulator output connectors are electronically isolated.
Stimulus Release Indicator
Flashes for the stimulation pulse.
CC Stimulator Output Socket (isolated)
For connection of stimulation electrodes with DIN plugs. Support for the active handgrip.
Touch-proof Output Connectors (isolated)
For connection of stimulation electrodes with touch-proof connectors.
Active Electrode Indicator
The green lights (LEDs) indicate the active (cathode) stimulation electrodes.
Re
ar Panel
HS Link Input Connector
－
Amplifier Module Connection.
Stimulation Electrodes
The recommended stimulation electrodes to be used in ordinary investigations are:
Electrode Number
Type
9013S030
Digital Ring Electrode
9013L035
Miniature Hand-held Stimulation Electrode
9031E017
Advanced Stimulation Handgrip
When using the surface (cutaneous) electrodes, the following applies:
Before applying the 9013L035 felt tips, they should be soaked in saline to obtain good electrical contact with the skin. Each pair of felt tips is
for use with one patient only.
Similarly, when using the electrode pins of the 9031E017, or other electrodes with metal contact provided without a conductive gel, the
skin impedance can be reduced using electrode paste, or an equivalent.
When using the reusable surface electrodes, make sure to reprocess them in accordance with the manufacturer’s instructions and in
accordance with a validated infection control procedure.
Footswitch (optional)
An optional footswitch is available in a triple pedal model. The function of each pedal is described below (A, B and C). Also see the
section in this manual. Note Ingress Protection: IPX1.
LINK
