Dantec Clavis User Guide
16
Access to the Battery Compartment
Figure 4. Dantec Clavis rear side, the battery compartment.
1
Turn off the device.
2
Slide open the battery compartment lid on the rear of the device.
3
Remove the old battery by pulling it up from the bottom end.
4
Insert the new battery into the battery compartment making sure that the plus and minus contacts are
facing as indicated by the symbols.
5
Slide
close the battery compartment lid until it locks in place.
CAUTION: Do not use the device if the battery compartment lid is open, or not correctly locked in
place.
NOTE: It is recommended that the battery be removed from the device if it is not used for an extended
period.
NOTE: Used batteries should be disposed of according to normal hospital/clinic policy or local regulations.