background image

 

https://www.naturewater.eu 

 

Item 63920, 63921

 

Page 2 

 

 

  

 

11 2023-1

 

 

The information contained in this document may alter at any time without prior notice. No part of this 
document may be copied or otherwise duplicated without prior written consent. All rights reserved.

 

WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.

 

Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating 
manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.

 

If you have found an error or wish to suggest an improvement, we look forward to hearing from you.

 

Send us an e-mail to:

 

 

[email protected]

 

 

or use our contact form:

 

 

https://www.wiltec.de/contacts/

 

 

The most recent version of this manual in several languages can be found in our online shop:

 

 

https://www.wiltec.de/docsearch

 

 
 

Our postal address is:

 

 

WilTec Wildanger Technik GmbH

 

Königsbenden 12

 

52249 Eschweiler – Germany

 

 

To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team 
before returning your goods.

 

 

Retourenabteilung

 

WilTec Wildanger Technik GmbH

 

Königsbenden 28

 

52249 Eschweiler – Germany

 

 

E-mail: 

[email protected]

 

Tel: +49 2403 55592–0

 

Fax: +49 2403 55592–15

 

 

 

Содержание 63920





















Отзывы: