https://www.naturewater.eu
Item 63920, 63921
Page 12
11 2023-1
Diagram of the “water supply” and “bypass” operating modes
Figure 1 – operation (wa-
ter supply)
Figure 2 – Bypass
№
Name/description
№
Name
1
Bar
3
Clamp
2
Bypass
4
Push rod, adjust to “service”
6.
Treatment of bypass valves in special cases: In the event of a failure of the device or other
special circumstances, the bypass valve of the machine can be set to the bypass state (push
the pull rod to the operating position as shown in Fig.
2). You can temporarily use the municipal
water supply directly. Once the fault or problem has been rectified, set the bypass valve to the
operating position (push the pull rod to the position shown in Fig.
1) to restore the clean-water
supply.
7.
The general installation scheme is divided into two installation methods (as shown in the figures
below).
Figure 3
Figure 4
№
Name
№
Name
1
Adaptor
2
Clamp
