https://www.naturewater.eu
Item 63920, 63921
Page 17
11 2023-1
Setting the parameters
Description of the setting buttons
•
: confirming the current change made on the screen to access the next changeable parameter
– after confirming the last change, returning to the higher-level menu
•
: cancelling the current change and returning to the higher-level menu
•
: scrolling up in the menu or increasing a displayed number by 1
•
: scrolling down in the menu or decreasing a displayed number by 1
Menu list of the user settings
In the operating mode, press to call up the menu for querying and setting the user parameters.
The menu displayed refers to the operating mode of the control valve. This means that different
operating modes have different setting menus. The description of the setting lines of the unla-
belled operating modes is displayed in all operating modes.
Operation and troubleshooting
Adjustable
parame-
ters
Parameter setting method
Display
Time
If “12:12” flashes continuously, the current time must be
reset.
1.
In the position “water supply,” press the button
to call up the user interface shown in Fig.
A1. The default setting “Set clock” is selected.
2.
Press the button again to call up the menu
for setting the current time, as shown in Fig.
A2. The hour “12” flashes. Press
or
to
set the hour.
3.
Press the button
again, the minutes “12”
flash. Press
or to set the minutes.
4.
Press the button
again to permanently
change the current time. Press to return to
the initial display.
Fig. A1
Fig. A2
