background image

 

   

Page 

16 

   

   

   

 

8.  WARRANTY 

One Year Limited Warranty 

The limited warranty program is the only one that applies to this unit, and it sets forth all the 

responsibilities of Nature Power. There is no other warranty, other than those described herein. 

Any implied warranty of merchantability of fitness for a particular purpose on this unit is limited in 

duration to the duration of this warranty.  

This unit is warranted, to the original purchaser only, to be free of defects in materials and 

workmanship for one year from the date of purchase without additional charge. The warranty 

does not extend to subsequent purchasers or users. 

Manufacturer will not be responsible for any amount of damage in excess of the retail purchase 

price of the unit under any circumstances. Incidental and consequential damages are specifically 

excluded from coverage under this warranty.  

This unit is not intended for commercial use. This warranty does not apply to damage to units 

from misuse or incorrect installation/connection. Misuse includes wiring or connecting to 

improper polarity power sources.  

 

RETURN/REPAIR POLICY: 

If you are experiencing any problems with your unit, please contact our customer service 

department at 

[email protected]

 or Phone 1-800-588-0590 before returning 

product to retail store. After speaking to a customer service representative, if products are 

deemed non-working or malfunctioning, the product may be returned to the purchasing store 

within 30 days of original purchase. Any defective unit that is returned to manufacturer within 30 

days of the date of purchase will be replaced free of charge.  

If such a unit is returned more than 30 days but less than one year from the purchase date, 

manufacturer will repair the unit or, at its option, replace it, free of charge. If the unit is repaired, 

new or reconditioned replacement parts may be used, at manufacturer’s option. A unit may be 

replaced with a new or reconditioned unit of the same or comparable design. The repaired or 

replaced unit will then be warranted under these terms for the remainder of the warranty period. 

The customer is responsible for the shipping charges on all returned items.  

 

LIMITATIONS: 

This warranty does not cover accessories, such as adapters and batteries, damage or defects 

result from normal wear and tear (including chips, scratches, abrasions, discoloration or fading 

due to usage or exposure to sunlight), accidents, damage during shipping to our service facility, 

alterations, unauthorized use or repair, neglect, misuse, abuse, failure to follow instructions for 

care and maintenance, fire and flood. 

If your problem is not covered by his warranty, call our Customer Service Department at                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              

[email protected]

 or 1-800-588-0590 for general information if applicable. 

 

 

Содержание 38330

















Отзывы: