8
Oxy-96 Oxygen Concentrator
Safety & Instruction Manual
installation
Unit must always be operated in upright position.
Please use standard electrical socket. If the local power supply has unsteady voltage,
or is outside of the specified 220±15volt, please connect a voltage regulator before
using the machine.
The machine should be located in a well-ventilated space, avoid direct sunlight. The
distance between the machine and the wall or other objects should be no less than
10cm.
Never place any objects on the machine while in use.
There should not be any obstruction around the air vents on the back and bottom
of the machine. Blocked air inlet or outlet may cause overheating, reduced oxygen
supply or damage to the unit.
FILL THE HUMIDIFICATION
WATER TANK:
Grasp the water tank on both sides and pull. The water tank is a separate unit which
will detach from the body of the machine.
Open silica gel plug at top and fill pure water to the indicator line.
Note:
Do not overfill.
Note:
To ensure the water tank stays clean, use only pure water such as cool boiled or
distilled water. Distilled water is available from most supermarkets.
Note:
Remember to replace the silicon plug firmly back into the inlet hole before
replacing the water tank.
Return the water tank to into position: Line up the three air pipes and push the water
tank back into place.