10
Oxy-96 Oxygen Concentrator
Safety & Instruction Manual
oxy-96 operating guide
how to operate
POWERING UP
Ensure that the machine is connected to a standard power socket. Press the toggle switch at the back of the machine. The unit will
emit a short beep and enter standby mode. The on/off button will light up and the machine is ready to operate from either the keypad
or remote control.
SWITCHING ON
Press the ON/OFF (oxygen) switch and the machine will commence operation. Various indicator lights will show as well as the
backlight on the water tank. The machine will emit a gentle whirring sound and oxygen will flow from the outlet, while nitrogen will be
emitted from the vent at the back. The machine runs continuously by default.
TIME+
Once the machine has been switched on, it will run continuously by default. Press the Time + button once and the time setting
will display 15 minutes. Each time you press the Time + button, the running time will increase in increments of 15 minutes until the
maximum of 180 minutes has been reached. Use the time setting as prescribed by your physician.
TIME-
Once the machine has been switched on, it will run continuously by default. Press the Time – button once and the time setting
will display 180 minutes. Each time you press the button, the running time will be reduced by 15 minutes. Use the time setting as
prescribed by your physician.
IONISE
The Natural Ozone OXY-96 oxygen concentrator has an additional feature known as a negative ion generator. Negative ions are
charged particles (anions) which are released into the environment through a vent at the back of the machine. The anions do not get
mixed with the oxygen which flows through the outlet. Negative ions have been shown to have beneficial effects such as reducing
pollution, pollen and pathogens in the environment. This is an optional benefit that you may choose to select while you are using
your oxygen concentrator. To operate, press the “ionize” (anion) key and the machine will start producing them automatically. Press
again to switch the function off. The indicator light will illuminate while the anion function is opertating.