12
Oxy-96 Oxygen Concentrator
Safety & Instruction Manual
oxy-96 operating guide
CARE AND MAINTENANCE
HOUSING CLEANING
The surface of the housing should be cleaning at least once every month. Disconnect the power cord before you clean it. Wipe it
with a clean, mild, damp cloth soaked with disinfectant. Do not let the liquid penetrate into the machine.
WATER TANK CLEANING
To keep the water tank clean, use only purified water, distilled water or cold boiled water and change water every day.
The water tank should be cleaned every week. First, remove the tank from the unit and half fill with water and a small amount of
detergent and give it a good shake. Next rinse with clean water. Ensure that all residue of detergent is washed out.
After cleaning the water tank, please remember to replace the silicon plug to avoid leakage of oxygen.
AIR FILTER CLEANING
The white air filter at the back of the machine can reduce noise, isolate dust and purify the air and should be cleaned around every
ten days.
1. Grasp the round air filter cover on the back of the machine and pull it out. It has an O-ring seal, so you need to pull quite hard.
Once the cover has been removed, the filter will be visible.
2. Remove the filter, which looks like a thimble from the air inlet tube.
3. First use detergent to wash, and then rinse it with clean water. Pay special attention that it is dry before replacing or the function
of the molecular sieve could be damaged, which will lead to decreased oxygen concentration.
4. Replace the filter back onto the air inlet and replace the cover.
OXYGEN TUBE AND OXYGEN INHALER CLEANING
The oxygen tube should be cleaned every three days. The delivery part of nasal cannula should be cleaned after each use. You
can soak it with 5% potassium permanganate (condes crystals) solution for 5 minutes, then rinse with clean water, or wipe it with
alcohol. Replace the oxygen tube every year.