Native Instruments Absynth 5, Справочное руководство

Страница: 89 / 204

ABSYNTH 5 Reference Manual – 89
% LFO modulation in opposite directions of the output positions deliver interesting Panning
effects. If the two points intersect, the sound characteristics become mono.
6.2.1 Parameters
Master Section
•
Beat switch : With the Beat switch you select whether the value in Master Length control
should be indicated in seconds (Sec) or in beats (Beat), ie in quarter Master Length con-
trol: Determines the virtual string’s maximum length. In terms of application this means:
that’s where the maximal delay can be set.
•
Master Sensitivity control : Defines the Macro Control’s impact on the value of the Master
Length’s parameter.
• Inversion switch
: If you turn on the Inversion switch, the effect of the control signal re-
ceived via the Macro Control is inverted (see the section on Modulation und Sensitivity
control).
•
Master Feedback control : Determines the level of the feedback signal in percentage of
the original level; at higher values, the virtual string resonates longer, at lower values it
is silenced faster.
• Lowpass control
: Defines the cutoff-frequency of the Lowpass filter, through which the
feedback signal passes (in Hz). It changes the string’s sustain characteristic.
Pipe Section
•
Input Position : defines the position for the element that animates the virtual string to vi-
brate.
•
Output Positions L/R
: define the positions for the two pickups L and R.
•
Sensitivity control : Determines the impact of the control signal received via the Macro
Control on the value of the Output Position controls, i.e. the position of the pickups.