If you have any questions concerning these instructions, please call National Customer Service
800.482.1717
.
Assembly Instruction
1610 Royal Street
Jasper, Indiana 47546
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
3248959
Rev, B
LOCHLYN
FREESTANDING FRAME
BUILD
3
FIGURE F
4
If applicable, flip over frame section
(Figure E)
and repeat steps 2 & 3 for any 3 hole
patterns on the 2nd side
(Figure F).
5
Repeat steps 2
-
4 on remaining frame
sections. All three
-
hole patterns must have a
junction box screwed in as noted in step 3. There
shouldn't be any remaining junction blocks from
the hardware bag or open 3 hole patterns after
these steps are complete
(Figure G).
6
Retrieve the Model AI Sheet with image of
assembled unit. Use this to identify the
position of each sub
-
assembly with respect to the
finished unit. Arrange the sub
-
assemblies in that
order on the ground to facilitate assembly of the
horizontal bars
(Figure H).
Note 1:
End assemblies only
have junction blocks on one
side.
Note 2:
For each horizontal
frame section, there will be a
matched pair of junction blocks
on either side of the frame.
Note 3:
The sub
-
assemblies
should be oriented so that the
glides will be at the bottom of
the assembled unit.
FIGURE G
FIGURE E
FIGURE H
