![background image](http://html2.mh-extra.com/html/national/lochlyn/lochlyn_assembly-instruction-manual_3375425012.webp)
If you have any questions concerning these instructions, please call National Customer Service
800.482.1717
.
Assembly Instruction
1610 Royal Street
Jasper, Indiana 47546
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
3248959
Rev, B
LOCHLYN
FREESTANDING FRAME
BUILD
12
W5
Attach the wall anchor bracket to the wall using the wall fastener selected
(with reference to the hardware recommendation in section W1), 1
3/4”
from the mounting bracket fastener that is secured to the back of the unit
(Figure Y)
.
W6
Reposition the freestanding frame into the final installation position so all
mounting brackets are in line vertically, or horizontally, based on required
installation orientation. Check that the frame is still level and wall anchor brackets align
and adjust if necessary.
Note:
The unit shall be
no greater
than three (3) inches from the wall to properly lace
and lock the restraint strap.
W8
Confirm restraint strap is securely laced and locked and finish the
installation. The frame is ready for use at this point.
W7
Insert the end of the wall anchor restraint strap through the hole on the end
of both brackets. Bring both ends of restraint strap together and slide the
flat end through the locked end with smooth strap surface facing outward
(Figure Z)
and
pull it through until all slack is removed.
FIGURE Y
FIGURE Z