National 5200 PANTHER, Инструкция по эксплуатации

Страница: 39 / 100

Page 26
5200 & 5200QL ADDING ADDITIONAL WEIGHT
CAUTION: Remove added weight from machine before transporting or loading machine. Failure to
do so could cause loss of control of machine, damage to machine or property and bodily injury.
CAUTION: A heavy machine cannot be used on wood subfloors or raised panel computer floors,
(keep machine light). Always check floor for proper strength to support the weight of the machine.
Figure A
Figure B
Front Weight Compartments
Rear Weight
Compartment
FRONT WEIGHT
Adding weight to the front of the machine is necessary for difficult to remove goods such as, VCT, VAT,
ceramic, thin-set, wood or increase traction on wet, dusty or slick surfaces. Machine includes twelve 36
lb. front weights with handles. Set front weights in front weight compartment (See Figure A). Maximum of
six weights per compartment. Use proper bolt length to hold weights securely in place (bolt length used
depends on amount of weights used. 1/2-13 SAE.
REAR WEIGHT
Adding rear weight creates more traction. The heavier the machine, usually the better it will work,
especially on hard to remove goods.
Machine includes one 100 lb. rear weight. Slide back weight in provided pocket under rear cowl (See
Figure B). Secure locking bolt with either a 9/16 or 3/4 wrench (size varies).
CAUTION: When using a elevator, always check the elevator weight limitations. Remove counter
weights and power packs if necessary.