background image

 
 
 

 

 

BY USING THIS PRODUCT, YOU ARE AGREEING TO BE BOUND BY THE TERMS AND CONDITIONS OF 
NATIONAL SEMICONDUCTOR'S END USER LICENSE AGREEMENT. DO NOT USE THIS PRODUCT UNTIL YOU 
HAVE READ AND AGREED TO THE TERMS AND CONDITIONS OF THAT AGREEMENT. IF YOU DO NOT AGREE 
WITH THEM, CONTACT THE VENDOR WITHIN TEN (10) DAYS OF RECEIPT FOR INSTRUCTIONS ON RETURN OF 
THE UNUSED PRODUCT FOR A REFUND OF THE PURCHASE PRICE PAID, IF ANY. 

The LM94022 Evaluation Boards are intended for product evaluation purposes only and are not 
intended for resale to end consumers, are not authorized for such use and are not designed for 
compliance with European EMC Directive 89/336/EEC, or for compliance with any other 
electromagnetic compatibility requirements. 

National Semiconductor Corporation does not assume any responsibility for use of any circuitry or 
software supplied or described. No circuit patent licenses are implied. 

 

 

 

 

 

LIFE SUPPORT POLICY 

NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN 
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF 
THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 

1.  Life support devices or systems are devices 

or systems which, (a) are intended for 
surgical implant into the body, or (b) 
support or sustain life, and whose failure to 
perform, when properly used in accordance 
with instructions for use provided in the 
labeling, can be reasonably expected to 
result in a significant injury to the user. 

2. A critical component is any component in a 
life support device or system whose failure to 
perform can be reasonably expected to cause 
the failure of the life support device or system, 
or to affect its safety or effectiveness.

 

 
BANNED SUBSTANCE COMPLIANCE 
 

National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products 
Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-
111S2) and contain no ‘‘Banned Substances’’ as defined in CSP-9-111S2. 

 

 

 

National Semiconductor 
Corporation

 

Americas Customer Support 
Center

 

Tel:      1-800-272-9959 
Email:  [email protected] 

National Semiconductor Europe 
Customer Support Center

 

Fax: +49 (0) 1 80-530 85 86 
Email: [email protected] 
Deutsch Tel: +49 (0) 699508 6208 
English   Tel: +49 (0) 870 24 0 2171 
Français Tel: +49 (0) 141 91 8790 

National 
Semiconductor 
Asia Pacific Customer 
Support Center

 

 
Email: 
[email protected] 

National Semiconductor 
Japan Customer Support 
Center

 

Tel:   81-3-5639-7560 
Fax:  81-3-5639-7507 
Email: 
[email protected] 

 

National does not assume any responsibility for any circuitry described, no circuit patent licenses are implied and National 
reserves the right at any time without notice to change said circuitry and specifications. 

©

 Copyright 2007 National Semiconductor Corporation 

10 

www.national.com 

 

 

Содержание LM26LV











Отзывы: