©
Copyright 2007 National Semiconductor Corporation
6
www.national.com
3.0 Functional Description
See the details of the normal operation and the
TRIP TEST mode operation in the datasheet.
See the datasheet for details regarding the
VTEMP inversely proportional output
voltage vs temperature characteristic.
3.1 LM26LVEB Evaluation Board Connection Table
Connector
Label
Connector
Name
Pin
Number
Description
1
VDD 1.6 to 5.5 VDC to this pin.
J1 POWER
IN
2
GND This is Power Supply return for V
DD
Input
J2
TRIP TEST
1 -2
If pins 1 and 2 are jumpered then TRIP TEST
Mode is selected.
J3 IDD
Jumper is installed unless a milliammeter is used
to measure the actual IDD.
J4 V
OUT
Output
Jumper is installed across pins 1 and 2 by default.
Otherwise resistor R3 is in series with the output.
J5 Test
Pins
Use these pins to test and monitor the signals on
the board. Do not inject signals here.
