National Instruments VXI-MXI-Express Series Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 88

background image

Chapter 2

Installation and Configuration

©

National Instruments

2-3

VXI-MXI-Express Series User Manual

restore them to the

TBL

subdirectory of your NI-VXI directory before

running MAX.

Note

If you save and restore the TBL files from an older version of NI-VXI, the software

will use TBL files that do not have the latest updates from National Instruments and may
not include recent hardware releases. If you added additional manufacturer or model names
to your TBL files, we recommend merging those changes with the latest updates included
with this version of NI-VXI, so that all your devices are properly identified.

For more information about the NI-VXI API, refer to Chapter 3,

Developing Your Application

Hardware Installation and Configuration

Prior to installation of the NI VXI-8360T/LT controller, determine if any
onboard jumper settings need to be changed. The NI VXI-8360T/LT
controllers’ default configuration of onboard jumpers should be acceptable
for most systems. Refer to Appendix B,

Default Jumper Settings

your system uses the front-panel CLK10 and trigger SMB connectors.

Caution

To guard against electrostatic discharge, touch the antistatic plastic packages to a

metal part of your computer or chassis before removing the boards from their packages.
Your computer or chassis should be plugged in but powered off.

Caution

The protection provided by the NI VXI-8360T/LT device can be impaired if it is

used in a manner not described in this document.

Installing Your NI VXI-8360T/LT Controller

1.

Power off the chassis.

2.

Verify that the backplane connector is intact and that there are no bent
or missing pins on the controller.

3.

Insert the NI VXI-8360T/LT controller into the chassis in Slot 0, as
shown in Figure 1-3.

4.

Firmly press the NI VXI-8360T/LT controller into the mating
connectors to ensure the module is fully inserted and seated in the
connector.

5.

Tighten the two ejector handle screws.

«
...
19
20
21
22
23
...
»

Содержание VXI-MXI-Express Series

























































































Отзывы:

Нет отзывов

Похожие инструкции для VXI-MXI-Express Series

Бренд: ABATEC Страницы: 8

Бренд: M&C Страницы: 16

ClubSport Wheel Base V2

Бренд: FANATEC Страницы: 39

Бренд: K&K Страницы: 6

Бренд: Xilinx Страницы: 52

Red Atom PETRA01

Бренд: Perenio Страницы: 24

Бренд: IBCcontrol Страницы: 16

Бренд: ACTi Страницы: 20

Бренд: SOARNEX Страницы: 14

Бренд: Tristan Auron Страницы: 30

Бренд: Lika Страницы: 28

Бренд: Lab-T Страницы: 17

Freescale Xtrinsic LFSTBEB865X

Бренд: NXP Semiconductors Страницы: 2

Бренд: VIPA Страницы: 394

Бренд: Planar Страницы: 162

Бренд: THK Страницы: 134

Бренд: FOR-A Страницы: 6

Бренд: turck Страницы: 45

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды