TBX-1329 Installation Guide
2
ni.com
❑
One of the following modules and its documentation:
–
SCXI-1120
–
SCXI-1120D
–
SCXI-1121
–
SCXI-1125
–
SCXI-1126
❑
SH32-32-A shielded cable assembly that includes the TBX cable
adapter
❑
Long-nose pliers
❑
3/16 in. wrench
❑
Number 1 Phillips-head screwdriver
Conventions
The following conventions are used in this guide:
This icon denotes a note, which alerts you to important information.
This icon denotes a caution, which advises you of precautions to take to
avoid injury, data loss, or a system crash.
italic
Italic text denotes variables, emphasis, a cross reference, or an introduction
to a key concept. This font also denotes text that is a placeholder for a word
or value that you must supply.
monospace
Text in this font denotes text or characters that you should enter from the
keyboard, sections of code, programming examples, and syntax examples.
This font is also used for the proper names of disk drives, paths, directories,
programs, subprograms, subroutines, device names, functions, operations,
variables, filenames and extensions, and code excerpts.
Safety Information
Caution
Do
not
operate the device in an explosive atmosphere or where there may be
flammable gases or fumes.
Keep away from live circuits. Do
not
remove equipment covers or shields unless you are
trained to do so. If signal wires are connected to the device, hazardous voltages can exist
even when the equipment is turned off. To avoid a shock hazard, do
not
perform procedures
involving cover or shield removal unless you are qualified to do so and disconnect all field