NI PXIe-4304/4305 and TB-4304 User Guide and Terminal Block Specifications
|
© National Instruments
|
3
–
NI PXI Express chassis
–
Cabling and sensors as required for your application
Tools
–
Number 1 and 2 Phillips-head screwdrivers
–
1/8 in. flathead screwdriver
–
Long-nose pliers
–
Wire cutter
–
Wire insulation stripper
Documentation
–
User Guide and Terminal Block Specifications
–
NI PXIe-4304/4305 User Manual
–
PXI Express chassis user manual
You can download needed documents from
Installation
Install the Software
Note
You must be an administrator to install NI software and devices on your
computer.
Ensure that the following software is installed before installing the PXIe-4304/4305 and
TB-4304 hardware:
1.
Your application software, such as LabVIEW, LabWindows
™
CVI
™
or .NET.
2.
NI-DAQmx—NI PXIe-4304/4305 modules were first supported in NI-DAQmx 15.1.1.
Note
For detailed NI software version support, refer to the
NI-DAQmx Readme
.
Back up any applications before upgrading software or modifying the application.
Unpack and Install the Module
Remove the packaging and inspect the module. Contact NI if the module is damaged. Do not
install a damaged module.
Caution
The module is static sensitive. Always properly ground yourself and the
equipment when handling or connecting to the module.