4
Finally, power up your SCXI chassis and computer. Figure 3 shows the
components of an SCXI system cabled to a DAQ board.
For more complete information on how to set up an SCXI system (multiple modules, configuration of different
types of modules, and so on.), refer to the Getting Started with SCXI manual.
SCXI
Cable
Assembly
SCXI-1303 or
SCXI-1300
Terminal Blocks
SCXI-1102
Module
SCXI Chassis
SCXI-1001
M
AIN
F
R
A
ME
SCXI
DAQ Board
Thermocouple
S
C
X
I
1
1
0
0
Figure 3. SCXI-1102 System Diagram (with DAQ Board)
Step 3. Configure Your Software
Note:
If you are using a plug-in DAQ board, and have not installed and configured the board, you
should do so now. Refer to your hardware user manual for instructions.
To configure your sytem software, first make sure that you have installed NI-DAQ software. Refer to your
NI-DAQ manual for detailed installation instructions.
After you install NI-DAQ software, run either wdaqconf.exe for Windows or NI-DAQ Utilities for Mac OS; then
configure your DAQ board and SCXI chassis. The following figures show configuration settings for Windows.
Run the appropriate configuration utility, selecting the parameters shown below. The following figures include
an AT-MIO-16E-2; your device may differ.
Содержание SCXI SCXI-1102
Страница 10: ......