SCXI-1327 Installation Guide
8
ni.com
Installing the Terminal Block
To connect the terminal block to the SCXI module front connector, perform
the following steps:
1.
Connect the module front connector to its mating connector on the
terminal block.
2.
Tighten the top and bottom thumbscrews on the back of the terminal
block to hold it securely in place.
Note
For accurate cold-junction compensation, place the SCXI chassis away from an
extreme temperature differential.
Cleaning the Terminal Block
Clean the terminal block by brushing off light dust with a soft, nonmetallic
brush. Remove other contaminants with deionized water and a stiff
nonmetallic brush. The unit must be completely dry and free from
contaminants before returning it to service.
Calibrating the Terminal Block
For information on calibrating the SCXI-1327, see the
SCXI-1327
High-Voltage Attenuator Terminal Block Calibration Procedure
located
online at
ni.com/calibration
and follow the link for
Manual
Calibration Procedures
.
Specifications
All specifications are typical at 25 °C unless otherwise specified.
Electrical
Compatible modules
SCXI-1120/1120D...........................8 input channels
SCXI-1121.......................................4 input channels,
4 excitation output channels
SCXI-1125.......................................8 input channels
SCXI-1126.......................................8 input channels
Содержание SCXI-1327
Страница 15: ......