PXIe-4330/4331 Calibration Procedure
|
© National Instruments
|
7
Install the CAL-4330 Into a Rack (Optional)
To install the CAL-4330 into a rack, complete the following steps:
1.
Attach the two rack-mount brackets to the sides of the CAL-4330. The brackets and screws
are included with the CAL-4330.
Figure 4.
Using the Rack-Mount Brackets
2.
Place the CAL-4330 in the desired position in your rack.
3.
Install and tighten the four rack-mounting screws that are included with the CAL-4330.
If the chassis is not already installed in the rack (optional), complete the following steps:
1.
Attach the PXIe chassis rack-mount hardware to the PXIe chassis. Refer to your
rack-mount kit installation guide for more details.
2.
Mount the PXIe chassis in the rack in the desired position. Refer to your rack-mount kit
installation guide for more details.
1
CAL-4330
2
Rack-Mount Brackets (2)
3
Rack-Mount Bracket Mounting Screws (4)
4
Rack-Mounting Screws (4)
SWITCH 1
SWITCH 2
DE
VIC
E UN
DE
R T
ES
T
PXI
e-4
330
/433
1
CAL
-433
0
4
2
3
2
1
