NI RMC-8354 Installation Guide
12
ni.com
Assembling the Outer Slide Assemblies
Follow these steps to assemble the outer slide assemblies:
1.
Measure the distance from the front rail of the rack to the rear rail of
the rack.
2.
Attach a long bracket to the rear of the right outer slide, as shown in
Figure 3.
3.
Adjust the outer slide assembly to the proper distance so that the
chassis fits snugly into the rack.
4.
Repeat steps 1–3 for the left outer slide.
Figure 3.
Assembling Outer Slide Assemblies
1
Outer Slide
2
Long Bracket
1
2
