10. Press the <F10> key to save your changes and reset the controller.
■
Delete Attempts—Use this setting to remove an existing attempt. To
remove the attempt, select Attempt X and set it to Enabled. Then select
Commit Changes and Exit to remove the selected attempt or select Discard
Changes and Exit to exit the Delete Attempts submenu.
■
Change Attempt Order—Use this setting to change the order of attempts.
Press the <Enter> key to open the attempt order list. Use the arrow keys to
select the attempt, then press the <+> or <-> keys to move the attempt up/
down in the attempt order list. Select Commit Changes and Exit to confirm
the changes or select Discard Changes and Exit to exit the Change Attempt
Order submenu.
Boot Setup Menu
Use this menu to configure settings related to the boot process and boot device
priority.
■
Boot Settings Configuration
—Use this setting to access the
Boot Settings Configuration
submenu. Refer to the Boot Settings
Configuration Submenu section for more information.
■
Network Boot
—This setting specifies whether the UEFI network stack is
enabled. When enabled, the HTTP/HTTPs boot and UEFI PXE boot options
appear and allow you to boot from a PXE server or HTTP/HTTPS on the local
subnet. You can configure the HTTP/HTTPS boot from the
UEFI Network
Boot Configuration
submenu to boot into desired devices. The default
value is
Disabled
.
Boot Settings Configuration Submenu
Use this submenu to apply alternate configurations to boot settings. Normally, you
do not need to modify these settings, as the factory default settings provide the
most compatible and optimal configuration.
ni.com
22
PXIe-8822/42/62 Getting Started
