■
Green ON steady—PXI and onboard power is on and within regulation
limits.
■
Green BLINKING—The controller has entered the soft off state and is safe
to power down.
Note
This status is applicable only when the chassis is set to
Manual Inhibit Mode
.
■
Green FADING—The controller has entered the sleep (S3) state.
■
OFF—The controller is powered off.
■
Red BLINKING—The controller detected a power rail fault when trying to
boot.
■
Red SOLID—The controller detected a thermal fault and has shut down to
protect the system.
■
USER LEDs — Two bi-color green/yellow LEDs (USER1 and USER2) that you
can define to meet the needs of your LabVIEW application.
The following table lists and describes the 10M/100M/1000M/2.5G LAN connector
LED states.
Table 1.
10M/100M/1000M/2.5G LAN Connector LED States
LED
Color
LED State
Condition
2.5G
1000
10/100
Green
On
2.5 Gb/s data rate is
selected
Amber
On
1000 Mb/s data rate is
selected
Unlit
Off
10/100 Mb/s data rate
is selected
ACT/LINK
Unlit
Off
LAN link is not
established
Green
On (steady state)
LAN link is established
On (pulsing)
The controller is
communicating with
another device on the
LAN
© National Instruments
11
PXIe-8822/42/62 Getting Started
