National Instruments PXIe-8106 Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 76

National Instruments PXIe-8106 Скачать руководство пользователя страница 61

Appendix A

Specifications

©

National Instruments Corporation

A-5

NI PXIe-8106 User Manual

•

FCC 47 CFR Part 15B: Class A emissions

•

ICES-001: Class A emissions

Note

For the standards applied to assess the EMC of this product, refer to the

Product Certification

Note

For EMC compliance, operate this device with shielded cabling.

CE Compliance

This product meets the essential requirements of applicable European
Directives as follows:

•

2006/95/EC; Low-Voltage Directive (safety)

•

2004/108/EC; Electromagnetic Compatibility Directive (EMC)

Online Product Certification

Refer to the product Declaration of Conformity (DoC) for additional
regulatory compliance information. To obtain product certifications and
the DoC for this product, visit

ni.com/certification

, search by model

number or product line, and click the appropriate link in the Certification
column.

Environmental Management

National Instruments is committed to designing and manufacturing
products in an environmentally responsible manner. NI recognizes that
eliminating certain hazardous substances from our products is beneficial
not only to the environment but also to NI customers.

For additional environmental information, refer to the

NI and the

Environment

Web page at

ni.com/environment

. This page contains the

environmental regulations and directives with which NI complies, as well
as other environmental information not included in this document.

«
...
59
60
61
62
63
...
»

Содержание PXIe-8106













































































Отзывы:

Нет отзывов