1. Launch MAX.
2. In the configuration tree, expand
Devices and Interfaces
to see the list of
installed NI hardware.
Installed modules appear under the name of their associated chassis.
3. Expand your
Chassis
tree item.
MAX lists all modules installed in the chassis. Your default names may vary.
Note
If you do not see your module listed, press <F5> to refresh the
list of installed modules. If the module is still not listed, power off the
system, ensure the module is correctly installed, and restart.
4. Record the identifier MAX assigns to the PXIe-3623. Use this identifier when
programming the PXIe-5832.
5. Associate the hardware modules that comprise your instrument.
1. Select the PXIe-3623 that is identified as not configured in the
configuration tree.
2. In the
Associated Devices
section, select the appropriate module
from each system component drop-down listbox.
Select the PXIe-5820 from the
Baseband
list. If you are using the
PXIe-5653 as an LO source, select the PXIe-5653 from the
LO1
(mmWave LO)
list.
Note
If you connected a mmRH-5582 mmWave Radio Head
to the system, the mmRH-5582 automatically appears as
connected in MAX when you expand the PXIe-3623
configuration tree item.
3. Click
Save
in the MAX toolbar.
Note
Module associations may be lost when you move the
modules to different chassis slots.
ni.com
18
PXIe-5832 Getting Started
