2. Use the other 152 mm MMPX (m)-to-SMA (m) cable to connect the
PXIe-3623LO1 IN front panel connector to the PXIe-5653LO1 OUT front panel
connector.
Related information:
■
Refer to the PXIe-5832 section of the NI RF Vector Signal Transceivers Help
for more information about how to make connections using an external clock.
Connecting mmWave Radio Heads
Depending on the hardware configuration you purchased, complete this section to
connect either one or two mmRH-5582 mmWave Radio Heads to the PXIe-5832.
Skip this section if your configuration does not include a mmWave radio head.
Recommended Torque
Ensure that connectors are torqued to the appropriate level when connecting
mmWave radio heads to the system.
Table 4.
Recommended Connector Torque
Connector Type
Torque
2.4 mm
0.9 N ∙ m (8 lb ∙ in)
SMA 27 GHz
0.9 N ∙ m (8 lb ∙ in)
Mini HDMI
0.34 N ∙ m (3 lb ∙ in), maximum
Power connector jack
0.34 N ∙ m (3 lb ∙ in), maximum
Connecting One mmWave Radio Head to the PXIe-5832
Complete the following steps to connect one mmRH-5582 mmWave Radio Head to
the PXIe-5832, as shown in the following figure.
ni.com
14
PXIe-5832 Getting Started
