Table 5. Device Front Panel Icon Definitions
Refer to the user documentation for required maintenance measures to ensure user
safety and/or preserve the specified EMC performance.
The signal pins of this product's input/output ports can be damaged if subjected to
ESD. To prevent damage, turn off power to the product before connecting cables and
employ industry-standard ESD prevention measures during installation, maintenance,
and operation.
Table 6. NI 5622 IF Digitizer Module Front Panel Connectors
Connector
Use
IF IN
Connects to the IF OUT connector on the NI 5601 RF downconverter module
front panel.
This connector is the input terminal for a frequency-translated IF waveform
from the NI 5601 RF downconverter for digitization and measurement.
CLK IN
Connects to the REF IN/OUT connector on the NI 5652 LO source module
front panel.
This connector is the input terminal for the Reference Clock or Sample Clock.
CLK OUT This connector is the output terminal for the NI 5622 Reference Clock or
Sample Clock.
PFI 1
This connector receives a digital trigger from an external source.
NI PXIe-5663E Getting Started Guide
|
© National Instruments
|
15
