![background image](http://html2.mh-extra.com/html/national-instruments/pxie-4163/pxie-4163_manual_3553378014.webp)
■
When the PXIe-4163 is in an environment where the ambient temperature
varies or the PXIe-4163 temperature has drifted more than ±5 °C from the
temperature at the last self-calibration
■
Within 24 hours of the previous self-calibration
Related tasks
■
What Should I Do if the PXIe-4163 Fails the Self-Test?
Programming the PXIe-4163
You can generate signals interactively using InstrumentStudio or you can use the
NI-DCPower instrument driver to program your device in the supported ADE of your
choice.
Software
Location
Description
InstrumentStudio
Note
InstrumentStudio is supported
only on 64-bit systems. If you are using
a 32-bit system, use your driver's
specific soft front panel instead of
InstrumentStudio.
InstrumentStudio is automatically installed when
you install the NI-DCPower driver. You can access
InstrumentStudio in any of the following ways:
■
From the Windows start menu, select
National Instruments
»
[Driver] Soft Front
Panel
. This launches InstrumentStudio and
runs a soft front panel populated with
NI-DCPower devices.
■
From the Windows start menu, select
National Instruments
»
InstrumentStudio
2018
. This launches InstrumentStudio and
runs a soft front panel populated with
devices detected on your system.
■
From Measurement & Automation
Explorer (MAX), select a device and then
click
Test Panels...
. This launches
When you install
NI-DCPower on a 64-bit
system, you can monitor,
control, and record
measurements from
supported devices using
InstrumentStudio.
InstrumentStudio is a
software-based soft front
panel application that
allows you to perform
interactive measurements
on several different
device types in a single
program.
ni.com
14
PXIe-4163
Содержание PXIe-4163
Страница 1: ...PXIe 4163 2022 06 30...