TB-2705 PXI Terminal Block
2
ni.com
❑
One of the following:
–
PXI E Series User Manual
–
waveform generation device user manual
❑
0.10 in. slotted screwdriver
❑
Number 1 Phillips-head screwdriver
❑
Wire cutters
❑
Wire insulation stripper
❑
One of the following:
–
E Series device overlay
–
Waveform generation device overlay
Conventions
The following conventions are used in this guide:
<>
Angle brackets that contain numbers separated by an ellipsis represent a
range of values associated with a bit or signal name—for example,
DBIO<3..0>.
This icon denotes a note, which alerts you to important information.
This icon denotes a caution, which advises you of precautions to take to
avoid injury, data loss, or a system crash.
italic
Italic text denotes variables, emphasis, a cross reference, or an introduction
to a key concept. This font also denotes text that is a placeholder for a word
or value that you must supply.
Safety Information
Cautions
Do
not
operate the device in an explosive atmosphere or where there may be
flammable gases or fumes.
Do
not
operate damaged equipment. The safety protection features built into this device
can become impaired if the device becomes damaged in any way. If the device is damaged,
turn the device off and do
not
use it until service-trained personnel can check its safety.
If necessary, return the device to National Instruments for service and repair to ensure that
its safety is not compromised.
