background image

1.

Power off the computer or chassis that contains the device.

2.

Reinstall the device and make any necessary adjustments to make sure that the device is
effectively cooled.

3.

Power on the computer or chassis.

Note

 

The thermal shutdown error is reported until the device has cooled to an

acceptable operating temperature and has been successfully reset.

For more information about cooling the device, refer to the 

Maintain Forced-Air Cooling

Note to Users

 included in your kit.

Related Information

Installing the PXI-5154

 on page 5

Installing the PCI-5154

 on page 6

Where to Go Next

NI PXIe-4112

EXPLORE

LEARN

CREATE

DISCOVER

Located online at ni.com/manuals

the application development

environment (ADE)

 for your application.

about hardware features 

or review device  

specifications.

custom applications with

an application programming

interface (API).

NI PXI/PCI-5154
Specifications

NI High-Speed
Digitizers Help

NI-SCOPE Soft Front Panel
NI-SCOPE Instrument Driver

NI High-Speed
Digitizers Help

NI-SCOPE Examples

Located using the NI Example Finder

Services
ni.com/services

NI Community
ni.com/community

Support
ni.com/support

more about your products through ni.com. 

NI Oscilloscopes
ni.com/oscilloscope

Getting Started with
LabWindows/CVI 

Getting Started with
LabVIEW

PXI/PCI-5154 Getting Started Guide

  | 

© National Instruments

  | 

15

Содержание PCI-5154

















Отзывы: