background image

www.landtek.com.cn 

www.landteknet.com

          

   PH-ORP 2000

This PH-ORP 2000 is small in size, light 
in  weight,  easy  to  carry.  Although 
complex and advanced, it is convenient 
to  use  and  operate.  Its  ruggedness  will 
allow  many  years  of  use  if  proper 
operating  techniques  are  followed. 
Please  read  the  following  instructions 
carefully  and  always  keep  this  manual 

within easy reach.

The controller can be used for applications such as 
w a t e r  t r e a t m e n t  a n d  m o n i t o r i n g ,  g a l v a n i c -
decontamination,  chemical  processing,  food 
processing,  clean  or  wastewater  control  and 
neutralization processes. Though the construction 
of  the  pH/ORP  Controller  complies  with  safety 
regulations currently in force, improper use could 
lead  to  hazards  for  the  user  or  a  third-party. 
Therefore, the operating instructions must be read 
and  understood  by  the  persons  involved  before 

1.INTRODUCTION

2.SPECIFICATIONS

work is  started with the pH/ORP controller.

Measurement 

0-14pH/1mV

-1000-1000mV

Range

Display

LCD

Accuracy

0.01pH

1mV

Output 

Optional DC 4-20 mA, Ma x. Load 1k

Control Action

ON/OFF Max 220VAC / Max 3A / 

Calibration

2 Points

Environment

0-60

Max 600VA

Cut opening size

92x92x110mm 

Power Supply

220V AC  50Hz or 110v AC 60Hz

Net weight

0.2Kg

1

section. Input the hysteresis value (dead band) 
on the auxiliary section by Pressing the up key 
    or down key    . e.g. to control the ORP value 
between 500-600 by adding water, just set 
LoAL to 

500

, and lb to 

100

.

10.1 it is recommended to wash the electrode 
      every 2 weeks.  
10.2 Maintenance schedules are based upon the 
     frequency of use and the severity of the 
      
     conditions.

10. GENERAL MAINTENANCE

11. ELECTRICAL CONNECT DIAGRAM

Monitor/controller's environment and operating

High set relay resting position (NC)

High set relay working position (NO)

Low set relay resting position (NC)

High set relay common

Low  set relay working position (NO)

Low set relay common
220V  AC  live wire
220V  AC  neutral wire

PH/ORP(Potential matching pin)

PH/ORP(Shield)

1

2

3

4
5

6
7
8

9

10

N O.

CONNECTION

8

Reviews: