![background image](http://html2.mh-extra.com/html/national-instruments/ni-scb-68a/ni-scb-68a_user-manual_3405895050.webp)
© National Instruments
|
2-29
One-Pole Highpass RC Filter
Figure 2-27 shows the transfer function of a simple series circuit consisting of a resistor (
R
) and
capacitor (
C
) when the voltage across
R
is assumed to be the output voltage (
V
m
).
Figure 2-27.
Simple RC Highpass Circuit
The transfer function is a mathematical representation of a one-pole highpass filter, with a time
constant of:
Use Equation 2-4 to design a lowpass filter for a simple resistor and capacitor circuit, where the
values of the resistor and capacitor alone determine
f
c
:
(2-4)
where
G
is the DC gain and
s
represents the frequency domain.
Selecting Components for Highpass Filtering
To determine the value of the components in the circuit, fix
R
(10 k
Ω
is reasonable) and isolate
C
from Equation 2-4 as follows:
(2-5)
The cutoff frequency in Equation 2-5 is
f
c
.
For best results, choose a resistor that has the following characteristics:
•
Low wattage of approximately 0.125 W
•
Precision of at least 5%
•
Temperature stability
•
Tolerance of 5%
•
AXL package (suggested)
•
Carbon or metal film (suggested)
R
C
V
in
V
out
1
2
π
RC
---------------
T s
( )
G
1
2
π
RC
(
)
s
+
-------------------------------
=
C
1
2
π
Rfc
---------------
=