![background image](http://html2.mh-extra.com/html/national-instruments/ni-scb-68a/ni-scb-68a_user-manual_3405895045.webp)
2-24
|
ni.com
Chapter 2
Analog Input and Temperature Sensor Measurements
One-Pole Lowpass RC Filter
Figure 2-21 shows the transfer function of a simple series circuit consisting of a resistor (
R
) and
capacitor (
C
) when the voltage across
R
is assumed to be the output voltage (
V
m
).
Figure 2-21.
Simple RC Lowpass Filter
The transfer function is a mathematical representation of a one-pole lowpass filter, with a time
constant of:
Use Equation 2-1 to design a lowpass filter for a simple resistor and capacitor circuit, where the
values of the resistor and capacitor alone determine
f
c
:
(2-1)
where
G
is the DC gain and
s
represents the frequency domain.
Selecting Components for Lowpass Filtering
To determine the value of the components in the circuit, fix
R
(10 k
Ω
is reasonable) and isolate
C
from Equation 2-1 as follows:
(2-2)
The cut-off frequency in Equation 2-2 is
f
c
.
For best results, choose a resistor that has the following characteristics:
•
Low wattage of approximately 0.125 W
•
Precision of at least 5%
•
Temperature stability
•
Tolerance of 5%
•
AXL package (suggested)
•
Carbon or metal film (suggested)
R
C
V
in
V
m
1
2
π
RC
---------------
T s
( )
G
1
2
π
RC
(
)
s
+
-------------------------------
=
C
1
2
π
Rfc
---------------
=