National Instruments NI PXIe-8105 Скачать руководство пользователя | Manualshive

Страница: 29 / 76

background image

Chapter 2

Installation and Configuration

©

National Instruments Corporation

2-15

NI PXIe-8105 User Manual

products. PXI Express devices must provide a driver and

.ini

file for

identification. These files are provided as part of the PXI Platform Services
software included with your controller. The minimum documentation
requirements for PXI-1 are contained in

.ini

files, which consist of ASCII

text. System integrators, configuration utilities, and device drivers can use
these

.ini

files.

The capability documentation for a PXI-1 chassis is contained in a

chassis.ini

file provided by the chassis manufacturer. The information

in this file is combined with information about the system controller to
create a single PXI-1 system initialization file called

pxisys.ini

(PXI System Initialization). The NI PXIe-8105 uses MAX to generate the

pxisys.ini

file from the

chassis.ini

file.

Device drivers and other utility software read the

pxiesys.ini

and

pxisys.ini

file to obtain system information. For detailed information

about initialization files, refer to the PXI specification at

www.pxisa.org

.

Upgrading RAM

You can change the amount of installed RAM on the NI PXIe-8105 by
upgrading the SO-DIMMs.

To upgrade the RAM, remove the NI PXIe-8105 from the PXI Express
chassis. To optimize both memory capacity and system performance, use
the same size and speed memory module in each of the two module slots.
The use of different size modules in each slot is supported, but system
performance will be slower than using two matched modules. However,
two mismatched modules will result in better performance than using a
single module.

National Instruments offers the following types of SO-DIMMs for use with
the NI PXIe-8105 controller.

•

PC2-5300 512 MB, 64 MB

×

64, CL 5, 1.18 in. max

(NI part number 779302-512)

•

PC2-5300 1 GB, 128 MB

×

64, CL 5, 1.18 in. max

(NI part number 779302-1024)

Note

National Instruments has tested and verified that the DDR2 SO-DIMMs we sell

work with the NI PXIe-8105. We recommend you purchase your DDR2 SO-DIMM
modules from National Instruments. Other off-the-shelf DDR2 SO-DIMM modules
are not guaranteed to work properly.

«
...
27
28
29
30
31
...
»

Содержание NI PXIe-8105













































































Отзывы:

Нет отзывов

Похожие инструкции для NI PXIe-8105

Бренд: Oracle Страницы: 24

Бренд: Moxa Technologies Страницы: 2

Бренд: Z3 Technology Страницы: 67

Бренд: Avenview Страницы: 28

Бренд: National Instruments Страницы: 80

Бренд: Advantech Страницы: 108

Бренд: Active Communications Страницы: 10

FireWire 800 ExpressCard 34

Бренд: LaCie Страницы: 24

Бренд: ZiLOG Страницы: 11

Бренд: Xcellon Страницы: 24

Бренд: SIIG Страницы: 8

Бренд: IEI Technology Страницы: 106

Linktropy MINI-G

Бренд: Apposite Technologies Страницы: 57

Бренд: Corsair Страницы: 134

Бренд: Abov Страницы: 8

Бренд: ADLINK Technology Страницы: 29

Бренд: U-Media Страницы: 42

Бренд: Lenze Страницы: 46

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды