National Instruments NI PXIe-1085 Скачать руководство пользователя страница 31

Страница: 31 / 86

2-11

NI PXIe-1085 Series User Manual

Front Panel and Fan Module LED Indicators

Figure 2-8 shows the front panel LEDs. Table 2-2 describes the LED states.

Figure 2-

Front Panel LEDs

Temperature LED

Fan LED

Power LED

Table 2-2.

Front Panel LED States

LED

State

Description

Temperature LED

Off

Chassis is powered off.

Steady green

Intake temperature is within chassis operating
range.

Blinking red

Intake temperature is outside of chassis operating
range.

Steady red

Intake temperature has reached critical limits.

Fan LED

Off

Chassis is powered off.

Steady green

All chassis fans are enabled and operating normally.

Blinking red

A single chassis fan has failed, but chassis can
continue to operate.

Steady red

Two or more chassis fans have failed, and chassis
must shut itself down.

Power LED

Off

Chassis is powered off.

Steady green

Power supply is active, and all voltages are within
normal operating ranges.

Blinking red

Power supply is active, and at least one voltage is
out of range.

Steady red

Power supply has failed.

Содержание NI PXIe-1085























































































Результаты поиска

Содержание NI PXIe-1085

Отзывы:

National Instruments NI PXIe-1085, Руководство пользователя, Страница: 31 / 86

Результаты поиска

Содержание NI PXIe-1085

Отзывы: