National Instruments NI PXI-6682 Скачать руководство пользователя страница 13

Страница: 13 / 65

Chapter 2

Installing and Configuring

2-2

ni.com

Remove the filler panel for the PXI or PXIe hybrid slot you chose in
step 2.

Ground yourself using a grounding strap or by touching a grounded
object. Follow the ESD protection precautions described in the

Unpacking

section of Chapter 1,

Introduction

Remove any packing material from the front panel screws and
backplane connectors.

Insert the NI PXI-6682 Series module into the PXI/PXIe hybrid slot.
Use the injector/ejector handle to fully insert the module into the
chassis.

Screw the front panel of the module to the front panel mounting rail of
the chassis.

Visually verify the installation. Make sure the module is not touching
other modules or components and is fully inserted into the slot.

Plug in and power on the chassis.

The NI PXI-6682 Series module is now installed.

Configuring the Module

The NI PXI-6682 Series is completely software configurable. The system
software automatically allocates all module resources.

The two LEDs on the front panel provide information about module status.
The front panel description sections of Chapter 3,

Hardware Overview

describe the LEDs in greater detail.

Содержание NI PXI-6682


































































Результаты поиска

Содержание NI PXI-6682

Отзывы:

Бренды по названию

Популярные бренды

National Instruments NI PXI-6682, Руководство пользователя

Результаты поиска

Содержание NI PXI-6682

Отзывы:

Бренды по названию

Популярные бренды