manualshive.com logo in svg

National Instruments NI PXI-6682, Руководство пользователя

Поделиться
Скачать
National Instruments NI PXI-6682 Скачать руководство пользователя страница 9

Chapter 1

Introduction

NI PXI-6682 Series User Manual

1-2

ni.com

Unpacking

The NI PXI-6682 Series is shipped in an antistatic package to prevent 
electrostatic damage to the module. Electrostatic discharge (ESD) can 
damage several components on the module.

Caution

Never

 touch the exposed pins of connectors.

To avoid such damage in handling the module, take the following 
precautions:

•

Ground yourself using a grounding strap or by touching a grounded 
object.

•

Touch the antistatic package to a metal part of the computer chassis 
before removing the module

 

from the package.

Remove the module

 

from the package and inspect the module

 

for loose 

components or any sign of damage. Notify NI if the module

 

appears 

damaged in any way. Do 

not

 install a damaged module

 

into the computer.

Store the NI PXI-6682 Series in the antistatic envelope when not in use.

Software Programming Choices

The NI PXI-6682 Series uses NI Sync software as its driver.

When programming the NI PXI-6682 Series, you can use NI application 
development environment (ADE) software such as LabVIEW or 
LabWindows/CVI, or you can use other ADEs such as Visual C/C++ to 
interface with the NI Sync software.

LabVIEW features interactive graphics, a state-of-the-art interface, 
and a powerful graphical programming language. The LabVIEW Data 
Acquisition VI Library, a series of virtual instruments for using LabVIEW 
with National Instruments DAQ hardware, is included with LabVIEW.

LabWindows/CVI is a complete ANSI C ADE that features an interactive 
user interface, code generation tools, and the LabWindows/CVI Data 
Acquisition and Easy I/O libraries. 

Содержание NI PXI-6682


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды