National Instruments NI cRIO-9036, Руководство пользователя

Страница: 12 / 40

Table 11. Mini DisplayPort Pinout
Signal Pin Pinout Pin Signal
DP_PWR 20
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
19 GND
AUX_CH(n) 18 17 ML_Lane2(n)
AUX_CH(p) 16 15 ML_Lane2(p)
GND 14 13 GND
ML_Lane3(n) 12 11 ML_Lane1(n)
ML_Lane3(p) 10 9 ML_Lane1(p)
GND 8 7 GND
CONFIG2 6 5 ML_Lane0(n)
CONFIG1 4 3 ML_Lane0(p)
Hot Plug 2 1 GND
The following adapters are available to connect the Mini DisplayPort to full-size DisplayPort,
VGA, or DVI. The cRIO-9036 only supports DVI single link. Refer to the cRIO-9036 pricing
page on
ni.com for a complete list of cables and accessories.
Table 12. Mini DisplayPort Accessories
Accessory Length Part Number
Mini DisplayPort to Full DisplayPort Native Cable 0.5 m 157232-0R5
1 m 157232-01
2 m 157232-02
Mini DisplayPort to VGA Adapter Cable 0.5 m 157230-0R5
Mini DisplayPort to DVI Adapter Cable 0.5 m 157231-0R5
Mini DisplayPort Retention Accessory — 156866-01
USB Host Ports
The USB host ports on the cRIO-9036 support common USB mass-storage devices such as
USB Flash drives, USB-to-IDE adapters, keyboards, mice, and USB cameras.
Caution
Do not hot-swap USB devices while the cRIO-9036 is in a hazardous
location or connected to high voltages. If the cRIO-9036 is not in a hazardous
location, you can connect and disconnect USB devices without affecting operation.
The following table shows the pinout for the USB host ports.
12 | ni.com | NI cRIO-9036 User Manual