![background image](http://html1.mh-extra.com/html/national-instruments/ni-9512-c-series/ni-9512-c-series_getting-started_3401836025.webp)
24
|
ni.com | Getting Started with NI 9512 Modules and AKD Servo Drives
Step 5: Install AKD WorkBench and Configure the Drive
AKD WorkBench is available on the CD that came with the AKD servo drive and is also
available from
ni.com/updates
. Complete the following steps to install AKD WorkBench.
1.
Insert the AKD WorkBench CD in the CD-ROM drive.
2.
Double-click
Full Setup.exe
to launch the installer.
3.
Follow the onscreen instructions to complete the installation.
Complete the following steps to configure the drive settings with AKD WorkBench.
1.
Launch the AKD WorkBench software by clicking the AKD WorkBench icon on the
desktop (
), or by selecting
Start»All Programs»Kollmorgen»AKD WorkBench
.
2.
Select the drive to configure from the list and click
Connect
.
Note
If the drive is not in the list, refer to the
section of
this document for possible solutions.
Figure 16 shows the AKD WorkBench
Start
page.
Figure 16.
AKD WorkBench Start Page
1
Availa
b
le Drives
2
Specify Address
3
Connect to Drive
1
3
2
Содержание NI 9512 C Series
Страница 1: ...NI 9512...