![background image](http://html1.mh-extra.com/html/national-instruments/ni-9505e/ni-9505e_operating-instructions-and-specifications_3449846030.webp)
©
National Instruments Corp.
29
NI 9505E Operating Instructions and Specifications
Safety
Safety Voltages
Connect only voltages that are within the following limits.
Channel-to-COM .............................. 0 to +30 VDC max,
Measurement Category I
Isolation
Channel-to-channel .................... None
Channel-to-earth ground
Continuous ........................... 60 VDC,
Measurement Category I,
(Double insulation)
Withstand ............................. 750 V
rms
, verified by a 5 s
dielectric withstand test
Measurement Category I is for measurements performed on
circuits not directly connected to the electrical distribution system
referred to as
MAINS
voltage. MAINS is a hazardous live electrical
supply system that powers equipment. This category is for
measurements of voltages from specially protected secondary
circuits. Such voltage measurements include signal levels, special
equipment, limited-energy parts of equipment, circuits powered by
regulated low-voltage sources, and electronics.
Содержание NI 9505E
Страница 1: ...sbRIO 9505 ...
Страница 2: ...OPERATING INSTRUCTIONS AND SPECIFICATIONS NI 9505E DC Brushed Servo Drive ...