![background image](http://html1.mh-extra.com/html/national-instruments/ni-9505e/ni-9505e_operating-instructions-and-specifications_3449846012.webp)
©
National Instruments Corp.
11
NI 9505E Operating Instructions and Specifications
•
Motor terminal (MOTOR±) short to V
SUP
•
Motor terminal (MOTOR±) short to COM
•
Module temperature exceeds 115 ºC
•
Sending commands to the motor before enabling the drive
Note
Do not command motor movement until the drive
is enabled with the
Enable Drive
method. Attempting to
control the motor before it is enabled will result in a fault.
•
Violating PWM minimum pulse width requirements. Refer to
the
section for more information about PWM.
Sleep Mode
This module supports a low-power sleep mode. Support for sleep
mode at the system level depends on the chassis that the module is
plugged into. Refer to the chassis manual for information about
support for sleep mode. If the chassis supports sleep mode, refer
to the software help for information about enabling sleep mode.
Visit
ni.com/info
and enter
cseriesdoc
for information about
C Series documentation.
Typically, when a system is in sleep mode, you cannot
communicate with the modules. In sleep mode, the system
consumes minimal power and may dissipate less heat than it does
Содержание NI 9505E
Страница 1: ...sbRIO 9505 ...
Страница 2: ...OPERATING INSTRUCTIONS AND SPECIFICATIONS NI 9505E DC Brushed Servo Drive ...