![background image](http://html1.mh-extra.com/html/national-instruments/ni-6110/ni-6110_calibration-procedure_3430808013.webp)
NI 6110/6111/6115/6120 Calibration Procedure
12
ni.com
•
gpctrNum
—
0
•
action
—
ND_RESET
3.
Call
GPCTR_Set_Application
to configure the counter for
pulse-train generation. Set the following parameters:
•
deviceNumber
—The value obtained from MAX
•
gpctrNum
—
0
•
application
—
ND_PULSE_TRAIN_GNR
4.
Call
GPCTR_Change_Parameter
to configure the counter to output a
pulse with an off time of 100 ns. Set the following parameters:
•
deviceNumber
—The value obtained from MAX
•
gpctrNum
—
0
•
paramID
—
ND_COUNT_1
•
paramValue
—
2
5.
Call
GPCTR_Change_Parameter
to configure the counter to output a
pulse with an on time of 100 ns. Set the following parameters:
•
deviceNumber
—The value obtained from MAX
•
gpctrNum
—
0
•
paramID
—
ND_COUNT_2
•
paramValue
—
2
6.
Call
Select_Signal
to route the counter signal to the
GPCTR0_OUT
pin on the device connector. Set the following parameters:
•
deviceNumber
—The value obtained from MAX
•
signal
—
ND_GPCTR0_OUTPUT
•
source
—
ND_GPCTR0_OUTPUT
•
sourceSpec
—
ND_LOW_TO_HIGH
7.
Call
GPCTR_Control
to start the generation of a square wave. Set the
following parameters:
•
deviceNumber
—The value obtained from MAX
•
gpctrNum
—
0
•
action
—
ND_PROGRAM
8.
The device begins to generate a 5 MHz square wave when the
GPCTR_Control
function completes execution. Compare the value
read by the counter to the test limits in the appropriate table. If the
value falls between these limits, the device has passed the test.
9.
Disconnect the counter from the device.
You have now verified the counter on the device.
Содержание NI 6110
Страница 1: ...PXI 6120...