![background image](http://html.mh-extra.com/html/national-instruments/ni-17-xx/ni-17-xx_getting-started_709627017.webp)
©
National Instruments Corporation
17
Getting Started with the NI 17xx Smart Camera
24 V external strobe
Polarity...........................................................Active high
Strobe frequency ............................................Operating frame rate
ON state
Voltage ...................................................Unregulated output drawn from the smart camera
power supply
Current ...................................................16 mA, maximum
OFF state
Voltage ...................................................Not driven
Current ...................................................Not applicable
Network
Network interface...................................................Ethernet
Ports .......................................................................2
Speed......................................................................10; 100; 1,000 Mbps
Duplex....................................................................Full, half
Speed autodetection ...............................................Yes
Duplex autodetection .............................................Yes
Auto MDI/MDI-X correction ................................Yes
DHCP Support .......................................................Port 1 only
Serial
Baud rates ..............................................................Up to 230.4 Kbps
Default baud rate............................................9,600 bps
Hardware flow control ...........................................No
Optically Isolated Inputs and Outputs
Isolated Inputs
Channels.................................................................2
Input type ...............................................................Sinking/sourcing, both inputs must have the same
configuration
Digital logic levels
OFF state
Input current...........................................0 mA to 0.1 mA
Input voltage ..........................................0 V to 1 V
ON state
Input current...........................................3 mA to 5.4 mA
Input voltage ..........................................20 V to 30 V
Minimum pulse width ............................................1 ms