National Instruments ISM-7413, Руководство пользователя

Страница: 19 / 28

18
|
ni.com
|
NI ISM-7413 Ethernet Integrated Stepper User Manual
Motor
From the NI Stepper Configuration Utility home screen, click the Motor icon to open the
configuration window and configure the following settings:
Figure 24. NI Stepper Configuration Utility Configuration Window
Running Current
Seting the Running Current to 100% will achieve maximum torque. However, under some
conditions you might want to reduce the current to save power or lower motor temperature. This
is important if the motor is not mounted to a surface that will help it conduct heat away or if you
expect the ambient temperature to be high.
Step motors produce torque in direct proportion to current, but the amount of heat generated is
roughly proportional to the square of the current. If you operate the motor at 90% of rated
current, the motor provides 90% of the rated torque and approximately 81% as much heat. At
70% current, the torque is reduced to 70% and the heating to about 50%.
Accel/Decel Current
The motor requires the most torque when accelerating and decelerating a load. You may need to
set the Accel\Decel Current higher than the Running Current to account for these peaks.