f)
Click
Next
.
g)
Select any additional add-ons you would like to install to the IC-3121.
h)
Click
Next
. Review the list of software to install.
i)
Click
Next
to begin downloading the software to the IC-3121. When MAX finishes
downloading the software, the IC-3121 restarts.
j)
Click
Finish
.
7.
Install custom software. You do not need to install custom software if you installed a
recommended software set.
a)
Expand the IC-3121 under
Remote Systems
.
b)
Click the
Software
item below the IC-3121 in the configuration tree.
c)
Click
Add/Remove Software
on the NI MAX toolbar to launch the LabVIEW Real-
Time Software Wizard.
d)
Enter
admin
as the username and leave the password field blank.
e)
If you are given a choice of recommended software sets, choose
Custom software
installation
and click
Next
to proceed with a custom installation.
f)
Select the NI Industrial Controller Device Drivers, and any additional software you
would like to install on the IC-3121.
g)
Click
Next
. Review the list of software to install.
h)
Click
Next
to begin downloading the software to the IC-3121. When NI MAX
finishes downloading the software, the IC-3121 restarts.
i)
Click
Finish
.
8.
Connect hardware to the IC-3121. The NI Industrial Controller Device Drivers enable the
IC-3121 to detect any hardware connected.
9.
Select the target in the configuration tree and click the
Refresh
button. Refresh the target
whenever you connect new hardware.
10. Expand
Devices and Interfaces
under the IC-3121 in the configuration tree. Select the
hardware connected to the IC-3121 from the list. You can view or modify the device
settings as allowed by the hardware.
Setting a System Password
Complete the following steps to set a system password.
Note
The default username for the IC-3121 is
admin
. There is no default
password for the IC-3121, so you must leave the password field blank when logging
in until you set a system password.
1.
In MAX, right-click the IC-3121 and select
Web Configuration
.
The NI Web-Based Configuration and Monitoring utility opens in the default browser and
is where you set the password. If you have not installed Microsoft Silverlight,
NI Web-based Configuration and Monitoring prompts you to do so.
2.
Enter a unique name for your system in the
Hostname
field.
3.
Click the
Security Configuration
icon.
4.
Click
Login
.
5.
In the
Login
dialog box, enter the username
admin
and leave the password field blank.
8
|
ni.com
|
IC-3121 Getting Started Guide
