Installation and Operations
Chapter 2
GPIB-PRL User Manual
2-2
© National Instruments Corp.
Installation
There are five basic steps to installing the GPIB-PRL.
1.
Inspect the GPIB-PRL for damage that may have been caused in
shipment.
2.
Verify the voltage requirement.
3.
Configure the operating parameters.
4.
Connect the cables.
5.
Power on the unit.
These steps are described in more detail in the following sections.
Step 1. Inspection
Before you install the GPIB-PRL, inspect the shipping container and its
contents for damage. If damage appears to have been caused in shipment, file
a claim with the carrier. Retain the packing material for possible inspection
and/or for reshipment.
If the equipment appears to be damaged, do not attempt to operate it. Contact
National Instruments for instructions.
Step 2. Verify the Voltage Requirement
The GPIB-PRL is shipped from the factory with either a 115 V or 230 V wall-
mount supply. Verify that the voltage on the supply matches the voltage that
is supplied in your area.
Caution:
Operating the unit at any voltage other than the one specified
could damage the unit.
