National Instruments FieldPoint FP-1300, Руководство пользователя

Страница: 11 / 53

Chapter 1 Overview of the FP-1300 Network Module
© National Instruments Corporation 1-3 FP-1300 User Manual
FP-1300 Setup Overview
The following list is an overview of the steps required to set up and run the
FP-1300.
1. Install the NI-CAN software and hardware as described in the NI-CAN
Hardware and Software Manual .
2. Install the FieldPoint hardware as described in Chapter 2, Installing
and Configuring Hardware and Software .
a. Mount the FP-1300, terminal bases, and I/O modules.
b. If you are not using an NI-CAN card with the FP-1300 system,
configure the DIP switches on the FP-1300.
c. Connect the FP-1300 to the CAN network.
d. Wire power to the FP-1300 CAN port.
e. Wire power to the FP-1300 system.
f. Wire signals to the I/O channels.
3. Install the FP-1300 Configuration Utility as described in Chapter 2,
Installing and Configuring Hardware and Software .
4. Launch Measurement & Automation Explorer (MAX).
5. Configure the FieldPoint system and verify the configuration,
as described in the
FP-1300 Configuration Help .
6. Deploy the system.